Air Conditioning Components
Air Conditioner Overview
As already mentioned, your air conditioner does more than just cool. It dehumidifies by reducing the volume of humid air, thereby taking a portion of its moisture. That’s the reason for pans and drains with air conditioners. It also aids in cleaning the air by removing allergen and debris particles from the airflow where they attach to the filter. But the largest purpose of your air conditioner is to remove the heat from your inside air and cool it, providing the maximum indoor comfort. Looking at this side of your air conditioner, most conventional central air conditioners have a hot side, which is located outside, and a cool side, located inside. Since these air conditioners have both outdoor and indoor components, many times you’ll see your air conditioner referred to as a split-system air conditioner.
In the very basest of explanations, here’s how your air conditioner works. Air conditioners transfer heat to the outside, taking it from the inside air. The compressed gas refrigerant in the system (you probably know DuPont’s Freon® refrigerant) absorbs the excess heat before it’s pumped through the piping in a closed system to an outside coil. A fan blows air over the hot coil, transferring the absorbed heat in the refrigerant to the outdoor air. The indoor air becomes cooled since the heat has been removed. The refrigerant is recooled and condensed here as a result and sent back to circulate through the system to begin the process again. There are many complex and smaller transactions throughout your air conditioning system, but this is basically how the system works.
Air Conditioner Components
An air conditioner is made up of many components, but the major parts doing the heavy lifting of moving the air indoors and outdoors are the evaporator, condenser, expansion valve, and compressor. Keep in mind they’re each either located outside (the hot side) or inside (the cool side).
The evaporator is located on the cool side. Its main function is to receive the liquid refrigerant. It’s paired with a fan blowing air over the chilled coils into your home. After it receives the liquid refrigerant, it converts it to gas through a drop in pressure.
The condenser is located on the hot side. Its main function is to facilitate heat transfer. Resembling a car’s radiator in looks, it actually works the opposite of the evaporator by converting the evaporated refrigerant back into a liquid. This process is called a heat transfer, working on the principle that heat will always move from a warmer to a cooler substance.
The expansion valve is located between the evaporator and condenser coils. Its main function is to regulate the refrigerant flow into the evaporator. It removes pressure from the liquid refrigerant allowing the conversion into gas to occur in the evaporator.
The compressor is located on the hot side. Its main function is to pressurize refrigerant. The compressor is a large electric pump repressurizing the refrigerant gas to convert it back into liquid. It assists the condenser, while the expansion valve assists the evaporator.
While there are additional fans, valves, sensors, and other components to your air conditioner, these four components are fundamentally the main components. Call Scottsdale Air at 480-467-3586 if you think you need service or replacement on one or more of them. Or one of our certified experts is happy to discuss the roles of these components in more detail with you anytime you have a question.
At Scottsdale Air, we’ve been providing affordable, top-notch heating and AC services to residents in Arcadia, Phoenix, Scottsdale, Tempe, Paradise Valley, Carefree, Cave Creek, Fountain Hills, Chandler, Mesa, Gilbert, and Ahwatukee since 1947.
Call Us at 480-945-7200
- or -